Smoke Detector Standalone - 10 Year Battery

No! The standalone model cannot be networked. To create a fire protection network, you need the wirelessly networked smoke and heat detector model.

There can be no compromises, especially when it comes to fire protection! ALPENLUFT smoke detectors are rigorously quality-tested. Our devices are TÜV Rheinland certified (test mark number 1111280065) and CE tested according to EU standard EN14604.
With ALPENLUFT you buy reliable security!

To begin with, you should equip all bedrooms and connecting corridors .
An alarm should be installed in every bedroom .

Install an alarm in the stairwell and on every floor of the house.

If the area to be monitored is larger than 60m² , you must install several smoke detectors.
Our wirelessly networked smoke and heat detector can be operated in both smoke and heat mode . In heat mode, high humidity is not a problem .

After the 10-year battery life has expired, the smoke detector must be completely replaced by law.

You have a 14-day money-back guarantee after ordering.

If you would like to return your order, please contact us at office@alpenluft.org , stating your order number . We will do everything we can to resolve the matter to your satisfaction.

You have a 14-day money-back guarantee after ordering. The standard functional guarantee is 5 years .

In the event of a warranty claim, please contact us at office@alpenluft.org, stating your order number .

If, contrary to expectations, the battery should run out before the specified 10 years, please contact us so that we can find a satisfactory solution for you.

Each smoke detector should be installed according to the manufacturer's instructions . As a general rule, smoke detectors should be installed on the ceiling and, if possible, in the middle of a room . In the case of networked smoke detectors, it is also important to ensure that all devices are properly connected to one another .

Please also see the user manual for the wireless and standalone models.

To turn the smoke detectors on and off, you must press and hold the test surface for about 10 seconds .

You can also do this with a broom handle , for example, if the detector is in an elevated position .

Sometimes the devices need a little longer than the 10 second button press described to turn on. In this case, we would ask you to hold down the test area for up to 30 seconds

You can download the user manual in PDF format here:

ALPENLUFT Smoke Detector Standalone User Manual